Reproduction techniques

Screen printing 

Equipment 

• squeegee 
• ink
• material to print on
• board

Health And Safety

• keep ink away from eye and mouth and if reaches eye rinse out with cold water and rinse out mouth if enters.

1) get your board and underneath  place any material you wish to print your board onto.  (before hand make sure your image is a high contrast of black and white when sending your photo off to get printed on the board) Duck tape around the sides of the board so no paint leaks out.
2) have a big layer of ink lined at the top of your board but not on your image ready for the squeegee to run down.
3) when row of ink is placed on the top get the squeegee at 40 degree angle and press hard when pulling the squeegee down towards you cover the image on your screen
4) life up the board gently when done and peel back the material from the board you are inking.
5) leave image to dry on drying rack. And wash the board clean



Bondaweb

Equipment

• bondaweb
• iron
• material 
• photograph
• cup of water

Health And Safety 

• Keep iron away from body as extremely hot, if slightly burned run part of your body under cold tap for 10 mins. If worse go to hospital.

1) get an image you wish to transfer using bondawed
2) cut out from the bonda web material the exact shape of your image you which to use 3 separate times so you have three layers
3) place the tree layers on top of the paper or material you which to use.
4) peel back the thin layer from the bondaweb (like double sided sticky tape) and do it to all three layers then place them neatly on  you material with then your image onto facing downwards
5) get an hot iron and then iron it ontop making sure it does burn
6) when everything is stuck down all together turn of the iron.
7) get a cup of water, dip fingers in the after then rub on the upside down image with damp fingers rubbing it away until your image appears how clear you want it.